Basic ICF Installation Recommended Tools Recommended Tools Quiz

The Recommended Tools quiz will cover some of the basic material presented in this lesson. Please answer the questions below. After completing the quiz you may mark this lesson complete and continue on to the next lesson.

Note: All quizzes in this course require an 80% passing grade to continue to the next lesson. If you do not meet the required score, click the “View Questions” button to see which questions were answered incorrectly and then click “Restart Quiz” to try again. 

Good luck!

Do you need a lot of tools to build with ICFs?
What are the basic tools that you need to work with BuildBlock?
Are ICFs hard to cut?
What is the molded pattern on the block used for?
How often do cut lines appear on the block?
What are penetrations?
How is rebar typically cut?
How can you safely bend rebar?
Check all that apply.
What does the bracing system do?
What should you do as concrete is poured?
What do you need to assist in clean up?
Check all that apply.
What is the primary use of permanent markers on an ICF jobsite?
Chalk lines are usually placed on the footing marking the outside edge of the block.
Which cutting tool produces the least waste?
Why would blocks need to be cut?
Check all that apply.
Where is it typically recommended to tie reinforcing steel together?
What does internally vibrating concrete achieve?
How is a foam gun primarily used on an ICF jobsite?