ICF Construction in 25 Steps Lessons Step 9: Cutting Block

Step 9: Cutting Block

Each BuildBlock form comes with a tape measure and cut lines molded onto the block. When cutting blocks use the cut lines and the 1-inch repeating pattern.

  • Ensure that all cuts are square and clean.
  • Place left over cut blocks near window and door locations when possible.
  • Cut blocks can be integrated into ICF walls as long as it has at least 1 web.
Step 9: If the wall requires cutting block, try to cut square and straight using the one-inch repeating cut line on the block. Placing cut block at window and door locations will simplify the build.
Step 9: If the wall requires cutting block, try to cut square and straight using the one inch repeat on the block. Placing cut block at window and doow locations will simplify the build.